Back To The Past ! Topico de FOTOS !

[efshope 6]

Eu ate tenho uma tabua de passar aqui, mas é escrota (BOSS cx1000m). Vamo deixar só coisa boa no tópico né?!

 

Qualquer que seja o amplificador, sempre queremos ver internamente, ainda mais se tratando desses aí.

Parabéns Aleixo e Genoveza pela contribuição.

[Luiz Henrique 64]

Rockford Fosgate Power T40001bd

 

4000 Watt RMS Class BD Amplifier

RMS Power Ratings:

 

1,500 watts RMS x 1 at 4 ohms

3,000 watts RMS x 1 at 2 ohms

4,000 watts RMS x 1 at 1 ohm

Frequency Response 20Hz to 300Hz +/- 0.5 dB

Shipping Weight TBA Lbs.

(TBA Kg.)

Dimensions (HxWxL) 2.6 x 12.8 x 33 (in)

6.6 x 32.5 x 83.8 (cm)

 

83cm de prancha UAHUAHAH

 

 

 

 

 

[Rafael_Brasil_123 74]

só coisa top

 

Tópico show !

 

Eu sempre fui apaixonado pelas pranchonas de surf !

 

PS: eu tenho uma prancha por aqui rsrsrs

é, pena q vc não pode abrir ele pra tirar umas fotos, mas eu bota uma fotinho igual, só pra mostrar a pressão do abzão hehe

[jean20612 0]

contribuindo e um sonho de consumo rs

 

Rockford Fosgate T2500.1

Number of Channels 1

 

Rated Power (RMS Continuous Power)

1500 Watts x 1 @ 4-Ohms

2500 Watts x 1 @ 2-Ohms

2500 Watts x 1 @ 1-Ohm

 

Two amplifiers in bdSYNC configuration:

5000 Watts x 1 @ 2-Ohms

 

Efficiency (average)

81.9% @ 4-Ohm

77.7% @ 2-Ohm

64.5% @ 1-Ohm

 

Crossover Controls

Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth

Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz

 

Tone Controls Bass: 0dB to +18dB @ 45Hz

 

Frequency Response 20Hz to 250Hz +/-0.5dB

 

Editado 27 de Maio de 2011 por jean20612

[NandoDH 10]

mais que beleza em bixo...

[Genoveza 3]

Roadstar RS-6800D Agressive SPL

1 x 1000W @ 4 ohms

1 x 2200W @ 2 ohms

1 x 3300W @ 1 ohm

[cmpicolo 126]

Show de bola esse tópico !!

 

[Rodrigorlc 16]

Pranchinha da torramps de 14 e 20K

Editado 27 de Maio de 2011 por Rodrigorlc

[JrFire 7]

RS-10000D Mono EarthQuake "Terremoto"

4 ohms - 1900 watts/1 canal

2 ohms - 3500 watts/1 canal

Ohms - 5000 watts/1 canal

Fr4 pcb com 2-oz dupla face

Crossover low pass variável 50~450hz

Filtro subsônico variável 20~50hz

Bass eq variável 0~18 db

Entrada p/ controle remoto bass

Mudança de fase variável 0~180º

Circuito de proteção digital

Sistema de ventilação

Fonte de alimentação pwm

Seleção master/slave

Entrada e saída rca

Potência rms: 5000 watts em (14v) 1 ohm

Dimensões: 265x63x650mm

Consumo em pico 800a

 

 

 

[tarcizio.z 3]

 

Actual Tested Rating @ 12 volts (Random Production Unit ser#60026)

1 Channels @ 4 ohms 1198 Watts

1 Channels @ 2 ohms 2311 Watts

1 Channels @ 1 ohms 4366 Watts

THD @ full power 1ohm .09%

Frequency Response Below 10hz - 228hz

Crossover Range (Bandwidth limiting) 30 - 230Hz

Bass Boost 20Hz - 80Hz + 15Db

 

S/N Ratio (A wtg) ref 1Wall 4 ohms 88.3Db

Max Peak Current Draw @ 4 ohms 123 amps

Max Peak Current Draw @ 1 ohms 443 amps

[Leonardo Morgado 21]

 

 

Deu vontade de vender minha prancha e pegar um desses ai que são especificos pra BASS.

[Genoveza 3]

Titanium 900.7

CENTER, FRONT and REAR CHANNELS

Into 4 ohms @ 12.5 Vdc (IASCA/USAC) . . . . . . . . . .18 x 5

Into 4 ohms @ 14.4 Vdc . . . . . . . . . . . . . . . . . . . . . .50 x 5

Into 2 ohms @ 14.4 Vdc . . . . . . . . . . . . . . . . . . . . .100 x 5

Into 4 ohms Bridged @ 14.4 Vdc (Front/Rear Only)..200 x 2

SUB CHANNELS

Into 4 ohms @ 12.5 Vdc (IASCA/USAC) . . . . . . . . . .25 x 2

Into 4 ohms @ 14.4 Vdc . . . . . . . . . . . . . . . . . . . . . .50 x 2

Into 2 ohms @ 14.4 Vdc . . . . . . . . . . . . . . . . . . . . .125 x 2

Into 4 ohms Bridged @ 14.4 Vdc . . . . . . . . . . . . . .250 x 1

Into 2 ohms Bridged @ 14.4 Vdc . . . . . . . . . . . . . .400 x 1

Common Specifications

Frequency Response . . . . . . . . . . . .±1dB, 20Hz to 20kHz

Signal to Noise Ratio (A-weighted) . . . . . . . . . . . . .>110dB

Input Sensitivity . . . . . . . . . . . . . . . .200 millivolts to 6 volts

DC Input Voltage Range . . . . . . . . . . .10 volts to 15.5 volts

Recommended Fuse Size . . . . . . . . . . . . . . . . . . .80 Amps

Typical Current Draw at Idle . . . . . . . . . . . . . . . . . .3 amps

Minimum Load . . . . . . . . . .1 ohm stereo / 2 ohms bridged

Dimensions . . . . . . . . . . . . . . . . . .25.5L x 10.0W x 2.35H

Front and Center High Pass Range . . . . . . . .40Hz to 4kHz

Rear High and Band Pass Range . . . . . . . . .40Hz to 4kHz

Sub Low Pass Range . . . . . . . . . . . . . . . . .40Hz to 400Hz

Crossover Slopes . . . . . . . . . . . . . . . . . . .24dB per Octave

Twin-T Bass Level . . . . . . . . . . . . . . . . . . . .0dB to +18dB

 

 

 

 

 

Editado 27 de Maio de 2011 por Genoveza

[Rvc 16]

Autotek MX3000.1

 

 

 

 

[Rvc 16]

Phoenix Gold Outlaw Limited Edition 1845

 

• 745 WRMS @ 4 ohms x2

• Gold Plated 2 Layer, 2 ounce Copper G10 Glass-Epoxy Printed Circuit Board

• Dual power inputs

• High-Current Triple-Darlington Output Stage design

• Tri-Linear output capacity (simultaneous stereo & bridged mono operation)

• Stereo 12dB per octave, continuously variable crossover from 30 to 500Hz

• Selectable HP, LP or Full Range for the internal amplifier and HP or LP for the external output

• Adjustable High-Q Bass EQ (0 to + 12dB) @ 45Hz

• Pulse width Modulated MOSFET Switching Power Supply

• Stable into 1 ohm stereo or 2 ohm mono loads

• Variable input sensitivity (200mV to 2V)

• Thermal Overload Protection

• Superior muting circuitry assures no turn on / off noise

• Optically isolated power supply

• VI limiting circuitry with over-current LED

• Low RFI/EMI design

• Bridgeable Outputs

• Extensive burn-in and QC testing for the ultimate in reliability

 

[viniciusaleixo 57]

Agora voce matou a pau....

 

Phoenix Gold e top demais !!

 

Abraco !

[Rvc 16]

Coisa linda esse amp hein aleixo?

 

abraço!

[tarcizio.z 3]

 

MCC602TM Power Amplifier Features

 

* 300 watts x 2 (2, 4, or 8 ohms), 20-20kHz, 0.005%THD

* Mono: 600 Watts (1/2/4 ohms), 20-20kHz, 0.005%THD

* Dual Pulse Width Modulated Power Supplies

* Balanced Push-Pull Design

* High Current Output (1 Ohm Stable)

* Balanced Noise Canceling Inputs

* Glass Top Plate w/Illuminated Wattmeters that measure both the current and voltage, and Visible Autoformers

 

 

Total Harmonic Distortion

Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output is: 0.005% for 2, 4 or 8 ohm loads (Stereo)

0.005% for 1, 2 or 4 ohm loads (Mono)

 

Dymanic Headroom

1dB

 

Frequency Response

+0, -0.25dB from 20Hz to 20,000Hz

+0, -3dB from 10Hz to 50,000Hz

 

Sensitivity

1Volt balanced or unbalanced inputs

 

A-Weighted Signal To Noise Ratio

114dB (2V)

 

Intermodulation Distortion

Maximum Intermodulation Distortion if instantaneous peak output per channel does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20,000Hz, with all channels operating is:

0.005% for 2, 4 or 8 ohm loads (Stereo)

0.005% for 1, 2 or 4 ohm loads (Mono)

 

Input Impedance

15,000 ohms balanced or unbalanced inputs

 

Power Requirements

12 Volts DC, 3.5 amps (idle) - 100 amps (600 watts)

 

Dimensions

26-7/8 inches (68.3cm) wide, 12-1/2 inches (31.75cm) depth, 4-3/16 inches (10.64 cm) high

 

Weight

50.5 pounds (22.9 Kg)

 

 

Ultimo visto a venda, era pra la 15.000,00 reais.

[viniciusaleixo 57]

[viniciusaleixo 57]

[Luiz Henrique 64]

Isso nao e´mais uma PRANCHA...é um PETROLEIRO UAHAUHUAHUAHAHAUH

 

 

Number of Channels 4

Rated Power

(RMS Continuous Power) 500 Watts x 4 @ 4-Ohms

 

1000 Watts x 4 @ 2-Ohms

2000 Watts x 4 @ 1-Ohm

3750 Watts x 4 @ 0.5-Ohm

2000 Watts x 2 @ 4-Ohms Bridged

4000 Watts x 2 @ 2-Ohms Bridged

7500 Watts x 2 @ 1-Ohm Bridged

 

Total Power

(Sum of Rated Power) 15000 Watts

Dynamic Power

(PVC/PowerCube® Measurement) 584 Watts x 4 @ 4-Ohms 0° Res

1122 Watts x 4 @ 2-Ohms 0° Res

2145 Watts x 4 @ 1-Ohm 0° Res

Bridgeable Yes

Crossover Controls High-Pass (HP): 32-300Hz 12db/Octave Butterworth

Low-Pass (LP): 32-300Hz 12db/Octave Butterworth

Infrasonic filter: -6db @ 20Hz 24db/Octave

Tone Controls n/a

Signal Input Low level: 2 RCA pair

Input switch: 2/4 ch.

Signal Output n/a

Power Input Connector Block

Power Wire Gauge 1/0 AWG

Speaker Output Connector Block

Speaker Wire Gauge 4 AWG to 12 AWG

Heat Sink Type Extruded aluminum

Cooling Fan Cooled

Remote Controls n/a

Visual Indicators Crossover Frequency

Gain

Available Power

Output Level

Amplifier Temperature

Circuit Topology Class Class A/B with Hybrid Technology (HT)

Frequency Response 10Hz to 40kHz +/- 0.5 dB

Shipping Weight 180 Lbs.

(81.8 Kg.)

Dimensions (HxWxL) 37.5 x 22 x 10 (in)

95.3 x 55.9 x 25.4 (cm)

 

 

 

 

 

 

 

 

[cjainf 42]

T15kW

Rated Power (RMS Continuous Power)

500 Watts x 4 @ 4-Ohms

1000 Watts x 4 @ 2-Ohms

2000 Watts x 4 @ 1-Ohm

3750 Watts x 4 @ 0.5-Ohm

2000 Watts x 2 @ 4-Ohms Bridged

4000 Watts x 2 @ 2-Ohms Bridged

7500 Watts x 2 @ 1-Ohm Bridged

 

[cjainf 42]

a perdi

[jean20612 0]

nunca tinha visto uma SD aberta :X sistema simples pelo qui promete. si compara com o RF T2500 PQP sem palavras né rs rs

 

 

[rick demolidor 222]

só coisa top

 

 

é, pena q vc não pode abrir ele pra tirar umas fotos, mas eu bota uma fotinho igual, só pra mostrar a pressão do abzão hehe

 

Seja feita a Vossa vontade rsrs

 

(vou chorar com a Koyama imports pra ver se consigo autorização pra tirar umas fotos do amp aberto)

 

 

Amplificador Audiophonic

EDGE 2K/4

 

Amplificador classe AB de 1992 Watts RMS.

Além de ser uma usina de força o EDGE2K/4 utiliza componentes da mais alta-tecnologia oque lhe confere uma qualidade de som sem igual, para se ter uma ideia, enquanto a quase totalidade dos amplificadores utiliza transistores TIP35 que é um componente de quase 50anos, no EDGE2K são utilizados transistores NJW, os melhores e mais modernos da atualidade, sendo utilizados em amplificadores automotivos pela primeira vez, mas largamente utilizado em amplificadores High-End residenciais e amplificadores P.A. de alta potencia, sistemas de som para estadios e cinemas.

 

1. DADOS TÉCNICOS

RMS Power @ 4 Ohm: 350W×4CH

Bridged Mode Power @ 4 Ohm: 985W×2CH

RMS Power @ 2 Ohm: 498W×4CH

THD @ 4 Ohm: <0.08%

THD at Rated Power: <0,5%

S/N ratio (+A): >90 dB

Stereo Separation: >70dB

Frequence Response (±3dB): 10Hz~50Kz

Bass Boost Frequence: 45Hz

Bass Boost: 0 dB~18dB

Hi Pass: 50Hz~250Hz

Low Pass: 50Hz~250Hz

Fuses: 40 Ah × 6

Thermal Protection: 70ºC

Size: 655mm(L)×256mm(W)×54mm(H)

 

 

 

 

 

 

[P-mAV 15]

T15kW

Rated Power (RMS Continuous Power)

500 Watts x 4 @ 4-Ohms

1000 Watts x 4 @ 2-Ohms

2000 Watts x 4 @ 1-Ohm

3750 Watts x 4 @ 0.5-Ohm

2000 Watts x 2 @ 4-Ohms Bridged

4000 Watts x 2 @ 2-Ohms Bridged

7500 Watts x 2 @ 1-Ohm Bridged

 

 

Kra essa po*** é tecnologia alienígena não é possivel!!!! [""] [""] [""] [""]

 

Mas ai eu não usaria esses amps no meu carro não... penduraria na parede do meu quarto kkk

Editado 27 de Maio de 2011 por P-mAV